Innovative and original anti-slip product
The compound is supplied as an epoxy-based paste, specially designed for on-site application to create high-traction areas, particularly on stairs and ramps.
Available in two colors, black and yellow, as well as in a phosphorescent version, the product improves step visibility and is also used to create anti-slip tactile markings on curbs or level changes.
Thanks to its thick consistency, the product can be applied on irregular or sloped surfaces and adheres to almost any substrate without the need for primers or bonding agents, even on highly porous surfaces.
For areas where extreme grip is required, traction can be significantly increased by adding the Antides Grano product during application.
KEY FEATURES
-
MAXIMUM DURABILITY
-
MAXIMUM SAFETY
-
EASY APPLICATION
-
INDOOR AND OUTDOOR APPLICATION
PHYSICAL PROPERTIES
| Consistency | Pasty |
| Mix Ratio (by volume) | 1:1 |
| Working Time | 30 minutes |
| Curing Time (at 24°C) | 8 hours |
| Hardness (according to Shore D scale) | 75 + 5 |
| Conductivity | No |
| Compressive Strength (MPa) | 75.86 |
| Relative Density (g/ml) | 1.27 |
| Adhesion Strength (MPa) | 11.03 |
| Slip Resistance Classification (CTE) | Class 03 |
CURING TIMES
| AMBIENT TEMPERATURE | WORKING TIME | FULL CURE |
| 13º C | 45 minutes | 12 hours |
| 24º C | 30 minutes | 6 hours |
| 35º C | 15 minutes | 3 hours |
RECOMMENDED SURFACES
Thanks to its excellent adhesion to any type of substrate, this solution is suitable for any surface, both outdoor and indoor.
-
Concrete
-
Porcelain stoneware
-
Metal surfaces
-
Epoxy, PVC
-
Wood
-
Stone
INSTRUCTIONS FOR USE
Unscrew the cap and remove the plug.
Pour a small amount of product until it flows from both sides.
Screw on the mixing nozzle. Dispense and discard the first two cm of product.
Use the supplied mould and place it in the area where you want to apply the product
Use a piece of the remaining mould to determine the end of the anti-slip strip
Follow the instructions related to the cartridge and apply the product
Use the spatula to level the product up to the height of the paper
Sprinkle the anti-slip grain depending on the grip required
Remove the paper mould 30 minutes after applying the product
STORAGE AND SHELF LIFE
18 months when stored in unopened containers. Store between 4ºC and 35ºC.
CLEANING PRODUCTS RESIDUES
Clean uncured material from tools and surfaces using industrial cleaning wipes, denatured alcohol or mineral turpentine. Cured material must be removed mechanically.
DOWNLOAD DATASHEET
RELATED PRODUCTS
BASE TITANIO DOMÉSTICO
ANTIDES BASE TITANIO is an INVISIBLE anti-slip solution, ideal for surfaces that are slippery but where preserving their original properties is essential.
BASE TITANIO INDUSTRIAL
ANTIDES BASE TITANIO is an INVISIBLE anti-slip solution, ideal for surfaces that are slippery but where preserving their original properties is essential.
ANTIDES GRP
ANTIDES GRP anti-slip sheets are manufactured from fiberglass-reinforced polyester and finished with an aluminum oxide grit surface. This type of material is extremely durable, while also being lightweight and easy to handle.
ANTIDES ACRYLIC
Water-based anti-slip coating solution, specially designed for application on acrylic surfaces such as bathtubs and shower trays, as well as wood, PVC, vinyl, and similar materials. It is very easy to clean.